Here are some examples of complete kits for use on small and mid-size or home grown Probe Stations.
Probe stations for small wafers (4” or less) typically come with a stereo microscope at very attractive cost and with extremely long working distance. That is fine for testing 4” wafers with feature sizes in the 10 µm range and above. But fine lines below 10 µm present a problem because of maximum available magnification to 150X or 200X with some severe degradation. Another problem is the illumination, typically with a fluorescent ring light.This solution has its drawbacks when viewing a shiny wafer surface.
A compound microscope with available magnifications up to 1000X or more and Koehler illumination with fiber optic light source eliminates these problems. But the industry standard, Mitutoyo’s Finescope FS70, cannot be justified from a pricing viewpoint for a small probe station under $5000. That is also true for Motic’s PSM- 1000, albeit to a lesser degree. There is a weight problem, too. Most small stations cannot support their weight without some flexing.
This MEIJI FU1000 series based solution is a much better match with pricing at $3000 and weight below 15 pounds. You can use the pole mount coming as standard with many small probe stations or you can bolt to a vertical surface as with the Mitutoyo FS70 or Motic PSM-1000. The hole pattern is not the same but we can supply an adapter or you can make one yourself.
The drawback is less working distance, 8 mm for the Meiji EPI 50X is somewhat tight but still workable. You will need to to use holders with spring clamping and cut off the probe tip shortly above the holder.
Or you can use a Mitutoyo or workalike objective with our adapters.
Image on the left shows a FU1000 based scope with trinocular head and centering nose piece, pole mounted on a small probe station.
Red arrows point to centering keys, normally used in the back on active objective.

Some LWD NIR objectives come with DIN threading and do fit without adapter. 

 Please contact us with any questions.

Thumbnail

Description

Part # / Price

FU1000, centering nosepiece, Tri EI head with depolarizer, 2 x 10X comp. Eyepieces, illuminator, light source, 36in fiber optic guide, 5X, 20X objective

FU0CTED360520 K        US$4673  Rs237019

FU1000, centering nosepiece, Tri EI head with depolarizer, 2 x 10X comp. Eyepieces, illuminator, light source, 36in fiber optic guide, 5X, 20X objective

FU0CTED360520 D        US$5633  Rs285711

FU1000, centering nosepiece, Tri EI head with depolarizer, 2 x 10X comp. Eyepieces, illuminator, light source, 36in fiber optic guide, 20X, 50X objective

FU0CTED362050 K        US$5474  Rs277647

FU1000, quadruple centering nosepiece, Monocular head, 10X comp. Eyepiece, illuminator, light source, 36in fiber optic guide, 5X, 20X objective

FU0CM360520K       US$3561 Rs180617

Please contact us by email. You can reach us by phone at (+1)361-384-0754.
Or we will call you back, just supply your phone number!
More Contact options here. Policies for shipping, payment, and returns here.

Please send any comments or questions regarding this site to webmaster.
Copyright 2007/2008/2009, tech-specialities, Inc. All rights reserved.